Video Transcript: Hi thanks for joining me, for this video I will be showing you our semi-rigid aluminium flexible ducting and some of its features. This flexible ducting is made of uninsulated heavy-duty aluminium, reinforced with a bronze wire helix. This flexible ducting has a temperature range of -30°C to 250°C and is supplied in … Continue Reading »
Video Transcript: Hi and thanks for joining me. For this video I will be explaining how the components of our cantilever arm bracket kit fit together. Here we have the components – a cantilever arm, spilt clip, threaded rod, nuts, top plates, channel nuts and end caps. First and foremost you need to decide where you need … Continue Reading »
Video Transcript: Hi thanks for joining me, in this video I will be showing the different types of worm drive clamps that we stock. Here I have the worm drive, quick release clamp and then clamp banding. Let’s start with our most popular – the worm drive hose clamp. We stock 9 different sizes of … Continue Reading »
Video Transcript: Hi guys, today we are going to show you to fit flexible ducting on to any of our ductwork parts. Here I have a selection of parts – a blast gate damper slot, reducer, top hat spigot and a male coupler. To fit them on, first you need to take a worm drive hose clamp … Continue Reading »
Video Transcript: Hi guys, in this video I will be showing you how to connect a saddle to a piece of spiral ducting. The spiral will need to be marked where you would like the saddle to sit. The best way to do this is to place the saddle on to the ducting and mark … Continue Reading »
Video Transcript: Hi, in this video I am going to show you how the ductwork parts fit together. Here I have a selection of standard parts, all the standard parts are male ended. Meaning that a bend fits nicely inside the spiral ducting. If you are wanting to fit a selection of parts together, you … Continue Reading »
Video Transcript: Hi Guys, today we are going to show you how to fit a Blast Gate Damper into Spiral Ducting. Here we have a section of spiral and a blast gate damper (I have already broken down the Blast Gate by taking out the nuts and bolts). First, we need to identify where we … Continue Reading »
Video Transcript: Hi, today we are going to be joining two pieces of spiral ducting together. All you need is a male coupler and the spiral. The male coupler slides inside the spiral, and you can join a piece of spiral ducting on to the other end of the male coupler, like so. There are … Continue Reading »
Video Transcript: Hi Guys! Today we will be comparing our two best selling types of Flexible Ducting. Both Flexible Ductings have a copper-plated steel wire trapped between two layers of polyurethane. The differences between the two are as follows: We will start with the wall thickness, these are both 100mm in diameter. The medium duty … Continue Reading »
Video Transcript: Hi guys, in this video I will be explaining how the unistrut bracket kit fits together. Here we have got a split clip, some threaded rod, channel nuts, top plates and M10 nuts. Take a piece of M10 rod and wind a nut on to each end, approximately 15-20mm down the length. Then … Continue Reading »