Videos

 Video Transcript: "Hi guys, thanks for joining me! In this video I will be showing you how to assemble our Backplate Duct Bracket Kit, used for fixing ductwork from a ceiling. Here I have the components, I have - a suspension clip, M10 threaded rod, M8/M10 backplate and 2 M10 nuts. The first job, is to wind an M10 nut on each end of ... Read more...

 Video transcript: "Hi guys, thanks for joining me! For this video I will be explaining the key features of our Thermaresistant Flexible Ducting. This flexible ducting is made from PVC coated polyamide making it lightweight - with a steel wire spiral trapped between two layers. It has a temperature range of -5 to 80 degrees celsius... Read more...

 Video Transcript: "Hi guys, thanks for joining me. For this video I will be explaining the key features of our Aluminium Combi Flexible Ducting. This Flexible Ducting is made from reinforced and lightweight aluminium/polyester and PVC laminated ducting with a wire helix for support. Aluminium Flexible Ducting is supplied as a 6 metre ... Read more...

Video Transcript: "Hi guys, thanks for joining me! For this video I will be showing you how to fit a circular access door into a section of ductwork. The access door is two galvanised pressed plates held together with the prefixed dome head screw and hand wheels - these are held apart with a conical spring in between the two for easy ... Read more...

Video Transcript: "Hi thanks for joining me, in this video I will be showing the different types of worm drive clamps that we stock. Here I have the worm drive, quick release clamp and then clamp banding. Let's start with our most popular - the worm drive hose clamp. We stock 9 different sizes of these. The product is a 12mm with ... Read more...

Video Transcript: "Hi and thanks for joining me! For this video I will be showing how the dual M8 - M10 thread on the suspension clip and backplate work. We get asked this question this a lot - is it M10 or M8? How can it be both? Hopefully this will help: If we take a closer look at this exploded sectional view of the thread, you can... Read more...

Video Transcript: "Hi guys, Today we are going to show you to fit flexible ducting on to any of our ductwork parts. Here I have a selection of parts - a blast gate damper slot, reducer, top hat spigot and a male coupler. To fit them on, first you need to take a worm drive hose clamp and slide that over the top of the flexible ducting... Read more...

Video Transcript: "Hi and thanks for joining me. For this video I will be explaining how the components of our cantilever arm bracket kit fit together. Here we have the components - a cantilever arm, spilt clip, threaded rod, nuts, top plates, channel nuts and end caps. First and foremost you need to decide where you need to fit this... Read more...

Video Transcript: "Hi thanks for joining me, for this video I will be showing you our semi-rigid aluminium flexible ducting and some of its features. This flexible ducting is made of uninsulated heavy-duty aluminium, reinforced with a bronze wire helix. This flexible ducting has a temperature range of -30°C to 250°C and is supplied in a... Read more...

Video Transcript: "Hi and thanks for joining me! For this video I will be showing our stayput flexible ducting and some of its features. Stayput flexible ducting is constructed of a rigid PVC strut profile, which is spirally wound to produce a robust flexible duct - with a temperature range of 20°C to 80°C. It is supplied as a 5 metre ... Read more...